1994-04 MUSTANG SVE DRAG "CLASSIC" WHEEL - 15X10 - DARK STAINLESS

This is a new wheel that was damaged during the mounting process. The has damage on the outer lip.  SVE Drag Classic Wheels
This 15x10 SVE classic drag wheel can help get your 1994-2004 Mustang down the drag strip faster! These Dark Stainless drag classic Mustang drag wheels are made for performance drag racing applications where traction counts the most. With high-quality construction and aggressive styling, the SVE Drag Classic Wheel will give you performance with looks to match. Hub-centric and secured with acorn-type lug nuts, these Mustang drag wheels don't need special washers or shank lugs to fit your Mustang. Why Drag Wheels
?
Switching to SVE drag wheels reduces weight and allows for track-specific, performance tires to be mounted on your Mustang. The front SVE wheels, known as front-runners, are skinnier than regular wheels to keep your front end as light as possible. The rear wheels are offered in 10" to mount wider tires, drag radials, or slicks for more traction. This allows you to launch harder and improve your ET's at the track. Drag Wheel/Lug Nut Disclaimer
When using longer than factory studs, an open end lug nut is required. SN95 Or Fox Spindle Wheels - Clearance Notes 1979-04 Mustang (All): 
Rear quad shock-equipped Mustangs may need to have the quad shocks reversed or removed for proper   fitment. Please check for clearance before driving.
Installation of wheels that are wider than the factory wheels on the rear of your Mustang may require fender rolling and exhaust   modification for proper fitment. 1979-93 Mustang (All) -
Steering rack limiters May be needed to eliminate rubbing issues when turning the front wheel. 1979-93 Mustang w/ Fox Spindle (All) -
May require a front 8MM spacer to keep the grease cap from pushing out the center cap. 1979-86 Mustang (All) -
Requires a front-wheel spacer OR upgrading to 1994-2004 Mustang spindles or 1987-1993 5.0 struts,     spindles & brakes 1979-90 Mustang (All) -
Due to smaller front wheel openings, the installation of wheels or tires that are wider than the factory may   require additional clearance on front fenders. 1987-93 Mustang (2.3L) -
Requires a front-wheel spacer OR upgrading to 1994-2004 Mustang spindles or 1987-1993 5.0 struts,   spindles & brakes. 1994-04 Mustang Cobra/IRS Equipped (All) -
May require Low Profile IRS Subframe Bolts for proper clearance. 1994-04 Mustang Cobra/IRS Equipped (All) -
An 1/8" Wheel Spacer may be required to ensure the rear center caps are correctly   secured. WHEEL SPECS
Diameter
15"
Width
10"
Bolt Pattern
5x114.3 mm.
Offset
+21 mm.
Backspacing
6.25 in.
Centerbore
70.6 mm.
Weight
18.5 lbs VEHICLE FITMENT
Ford Mustang - 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Fitment Notice
The SVE drag wheels are NOT intended for street use, or for daily driving.
This wheel is specifically designed as a rear wheel ONLY. It will NOT fit on the front of your Mustang.
1979-1993 Mustang
With 5 lug rotor
1994-2004 Mustang
Fits Mustang GT/V6 w/ stock 10.5" rear brakes.
Will NOT fit 1999-2004 Cobra, Mach 1, or Bullitt with stock 11.65" brakes. Will NOT fit V6 or GT with Cobra 11.65" brake conversion. These wheels are NOT recommended to be used with the following applications: 1994-2004 Mustang Cobra, Mach 1, or Bullitt. While we do NOT recommend these wheels be used in the aforementioned applications. Modifying the IRS outer tie rod and the knuckle for clearance would be required. IRS applications will need low-profile subframe bolts. All Cobra, Bullitt, and Mach 1 rear brakes require low-profile banjo bolts and/or grinding to the block. Wheel Torque Specs
1979-2014 = 100 lb/ft

Returns Not Accepted